Mon-Fri Customer Support + 44 20 37698881
FREE WORLDWIDE SHIPPING FROM £35

SAMSUNG GALAXY SMARTWATCH ACTIVE - USER MANUAL

 

To have a comprehensive understanding and using this device, to know all the features and simple operation method, please read this manual first. 

Package: One gift box, one user manual, one smart band unit.

PRODUCT OVERVIEW

  • Home button:Long press the switch; short press the screen to lighten the screen.
  • Touch instructions:Tap to enter and swipe right to back;
    -Slide down to enter the status bar under the home screen;
    -Slide right to enter the Multiple sport mode;
    -Slide left to enter the main menu;
    -Slide up to notification center.
  • Changeable band:There is a switch pin at the connection between the watch case and band - simply slide it to the middle to take off/on the band.

HOW TO CHARGE?

  • Place the micro USB charger (it can be connected to a 5V mobile phone charger and computer USB interface) on the smartwatch as displayed in the illustration above and a battery icon will appear on the watch face to denote that it is charging.
  • Please charge the device for 90 minutes before switching it on for the first time. The battery will last up to 24 hours, based on usage.
THINGS TO CONSIDER BEFORE/WHILE CHARGING

Step A:

- Verify that the charging contacts (on the watch) are clean.
- Make sure the charging pins (on the charger) are not bent.
- Place the watch on the charger aligning the charging pins with the charging contact points.

- Verify watch is seated snugly on the charger with no gap.
- Verify nothing is between charger and device, i.e. no dust, tape, etc.
- Make sure the charging pins on the watch and cradle/dock are clean.
- You can wipe them with a slightly damp soft cloth.
- Check if there is any dust in the USB port. Blow on the port gently to remove any dust.
- Make sure the charger is getting power. Verify if the charger’s USB cable works with other devices.
- Sometimes if the device gets too hot while charging, it will go into a thermal shutdown mode until it cools off and then, will continue charging once it is safe again. Try removing the device from the charger, wait for it to cool down, and place it on the charger again.

Step B:

- Allow your watch to charge for 60 minutes, then try to turn on the watch.

Step C:

- Try changing the charger’s power source, i.e. move to wall outlet from a laptop or vice versa.

PAIRING WITH YOUR SMARTPHONE

Compatible system requirements:
  • Android 4.4 or above
  • Bluetooth 4.0
  • iOS 9.0 or above 

There are two apps that you can possibly download to operate this smartphone:

1. FUNDO PRO APP

For Android Users
Enter the GOOGLE PLAY STORE of your phone and search “FunDo Pro" app. 
Download by using smartphone using the QR code.

For IPhone Users
Enter the APP STORE of your phone search “FunDo Pro" app
Download by using smartphone using the QR code.

Step 1. Download & Install the FunDo Pro APP from Play store/APP store.
Step 2. Ensure that Bluetooth and GPS is on and discover able on your phone.
Step 3. Open the APP on your phone and click on Add device / Bind device
Step 4. Select the device name with the Corresponding MAC ID from the list and wait for the device to be paired.

Youtube video:  How to pair your smartphone with FunDo Pro App

2. WEARFIT 2.0 APP

For Android Users
Enter the GOOGLE PLAY STORE of your phone and search “Wearfit 2.0” app.
Download by using smartphone using the QR code.

For IPhone Users
Enter the APP STORE of your phone and search “Wearfit 2.0” app.
Download by using smartphone using the QR code.

Step 1. Download & Install the Wearfit 2.0 APP from Play store/APP store.
Step 2. Ensure that Bluetooth and GPS is on and discover able on your phone.
Step 3. Open the APP on your phone and click on Add device / Bind device
Step 4. Select the device name with the Corresponding MAC ID from the list and wait for the device to be paired.

MAIN FEATURES

  • Language/Time/Date It will synchronize the date & time from the phone when Bluetooth is connected with the app.
  • Watch faces:  There are couples watch faces for options, long press the home switch (for 2 seconds) to change.
  • Status bar:  Slide down to enter the standby interface with the Bluetooth status, QR code (scan it with mobile phone and download “WearFit 2.0 or FunDo Pro”), brightness adjustment, and battery status.
  • NotificationsSlide up into the notifications. The notifications synchronize from the phone once connected via the app - such as calls, WhatsApp, SMS, WeChat messages, etc.
  • Pedometer, Distance, CaloriesHelps to monitor daily steps, mileage, calories. The meter resets at 0 o'clock each day. Additionally, it records 7 days of data in the watch.
  • Sports modeSlide right to enter the Multiple sport mode. Select one mode to start and slide right to pause the exercise. It records the duration, calorie consumption, heart rate, etc.
  • Stopwatch:  Press the start and pause, again press for stop.
  • Remote camera:   Enter the app, tap + enter the camera function, shake the watch to take a photo.
  • About: Tap to enter, check device model, firmware version, Bluetooth address.
  • Reset:  Reset the software of the device.
  • Alarm: Set several alarm clocks through the App in the phone.
  • Sedentary Reminder:  You can set time to remind yourself stand up and get active.
  • Find your phone: Tap the smartwatch and if your phone is connected to it (as it should be), then it will produce an alert sound.
  • Adjustable BrightnessSet it in the App, however, it takes more power consumption when it is on.
  • Units SetupMetric or British system.
  • Data transmission:All the data will be saved in the device. No matter pedometer, heart rate, sleep quality, and multi-sport mode, the data all can be transmitted to the APP in the phone.
HEALTH CARE
  • Heart rateWhen this function is activated, the heart rate is measured by the device scanning the surface capillary of the skin with its green optical diodes. Please allow for about 2 seconds to start measuring and recording. Slide to other menus to stop measuring. Please refer to information online about the average heart rate, heart rate while exercising for your age group and gender and/or ask your medical practitioner for advice.
  • Blood pressurePlease put your hands flat on a surface and do not move. When this function is activated, it needs about 45 - 50 seconds of measuring time and reading to provide a result
  • ECGThe device combines an optical heart rate sensor and ECG sensor to show information about the user’s heart function for reference. When this function is activated, it needs about 30 seconds of measuring and reading to provide a result.
  • Blood OxygenBlood oxygen (SP02H) level is the amount of oxygen circulating in the blood. Please refer to information online about healthy or abnormal blood oxygen percentage for your age group and gender online and/or ask your medical practitioner for advice.
  • Body Temperature Measurement:  The normal body temperature is 35.9-37.2 degrees and it varies from time to time every day. The maximum temperature difference is 1 degree. The temperature over 37.3 is low grade fever.
  • Sleep monitor Sleep monitoring will be automatically active from 10:00pm to 8:00am the next morning. You can change these timings on your phone depending on your sleep schedule. You can check the details of sleep quality with the WearFit2.0/FunDo Pro app in the phone.

DISCLAIMER:  The device is not a medical device. Any values shown are for reference only.

IMPORTANT FAQs

  • Q. HOW DO I POWER ON MY SMARTWATCH?
    A. Press and hold down the side power button for at least three seconds. Make sure the smartwatch is charged before trying to power it on. The smartwatch will also power on when connected to the charger.
  • Q. HOW FAR AWAY CAN MY SMARTWATCH BE FROM MY PHONE AND STILL BE CONNECTED?
    A. The range of the wireless Bluetooth connection between your phone and your smartwatch can vary greatly depending on the environment. In general, you should have at least 10 metres (or 30 feet) of connectivity.
  • Q. IS MY SMARTWATCH WATER AND/OR DUST PROOF?
    A. Your smartwatch is dust and splash resistant with a waterproof rating of IP67. However, we recommend limiting exposure to dust and water because certain materials on the smartwatch (such as leather straps) may react poorly to exposure.
  • Q. WHY CAN‘T I PAIR MY SMARTWATCH TO MY PHONE?
    A. Ensure that your smartwatch is powered on and Bluetooth is enabled on your phone. Launch the App and follow the on-screen instructions for pairing your watch. If it fails to connect, check the Bluetooth menu on your phone. If you see the smartwatch in the device list, remove it. Relaunch the App and repeat the pairing process.

SAFETY INSTRUCTIONS

1. Prolonged contact may contribute to skin irritation or allergies in some users.
If you notice any signs of skin redness, swelling, itchiness, or other skin irritation, please discontinue use or wear the product clipped over a piece of clothing. Continued use, even after symptoms subside, may result in renewed or increased irritation. If symptoms persist, consult your doctor.
2. This product is not a toy. Do not allow children or pets to play with your OPTA product. The product contains small components that can be a choking hazard.
3. The device contains electrical equipment that could cause injury if not handled properly. 
4. This product is not a medical device, and is not intended to diagnose,
treat, cure, or prevent any disease.
5. Consult your doctor before beginning or modifying any exercise program.
Consult your doctor before use if you have any preexisting conditions that
might be affected by your use of this OPTA product.
6. Do not check call notifications or other data on the product's display while driving or in other situations where distractions could be hazardous.